Halo B 9 Volt Conversions

FEZ · 11-29-2004, 09:10 PM

Hello.

I am selling Halo B (Will work with Empire Reloader B's as well) 9 volt conversions. This will change your loader from using 6 AA batteries, to 2 9 volt batteries.

This does not only Decrease the weight of the loader by gettign rid of those Massive AA batteries, but it increases the battery life of your loader an enormous amount--and increases the BPS of your loader by a few Balls per second.

6 AA batteries @ 1.5 volts each = 9 volts. That is 1 9 volt right there. This allows you to use 2...which increase the Amps, thus, feeding faster.

This mod will not burn out your motor, because The motor will only use the current it needs. The potential is there for more current, but it won't be used because the motor only draws so much.

[color=red]This is a drop in mod, you do not have to cut or solder anything at all[/red]

However, i will not be held responsible for anything that goes on While you have this mod installed. I have installed this on many, and mine when i recieve it; no problems, only success.

No More industry sized packages of AA batteries in your gear bags!

The cost is 10 dollars. Discounts will be given for more than 1 order. FOr a limited time, purchase 2 for 17 dollars. Price is negotioble. Discounts i say!

I will also give discounts for Team Orders as well

Here is a picture of one of the nicer ones that i Have made. All of the ones that are being made from this point forward will look like this. Earlier models have a more 'rustic' look as they are not as neat. But it gets the job done.

I scanned this in, lol.

wileyc143 · 11-29-2004, 11:57 PM

how professional is this mod, it sounds like some backwoods duct tape and glue job. got some pics to convince the sceptical?

TomH · 11-30-2004, 10:04 AM

All you have to do is go to Radio Shack and buy 3 9volt harnesses and some heat-shrink , wire up the harnesses, and voila! If you want you can also find some 9volt holders, like the AA holders that come stock with the Halo.

BJ · 11-30-2004, 01:59 PM

Oh NO! Someone gave away the secret to Fez's master plan to make millions from these! hehe
Seriously do you have a pic on them?

Christian · 11-30-2004, 03:40 PM

Quote:

Originally Posted by TomH

All you have to do is go to Radio Shack and buy 3 9volt harnesses and some heat-shrink , wire up the harnesses, and voila! If you want you can also find some 9volt holders, like the AA holders that come stock with the Halo.

well..you could do that, but I would trust Fez if I were you. I mean, think about it, he's from like Iraq and was inbread for this type of stuff.

FEZ · 11-30-2004, 04:05 PM

BJ, thanks, thanks christian. And maybe its just me, but its not too courteous to go on sombodys thread and say shit that you shouldnt put on My thread....*Cough* Tom...jesus....

And no this isnt a throw together piece of shit. They are soldered together...not glued....and the soldering joints are covered with a layer of electrical tape.

So to all you assholes who have nothing good to say, dont say it.

Thanks. 🙂

wileyc143 · 11-30-2004, 04:10 PM

hahaha, but then why did noone else do this before now? I think theres more to it than meets the eye

TomH · 11-30-2004, 04:37 PM

Quote:

Originally Posted by fez

BJ, thanks, thanks christian. And maybe its just me, but its not too courteous to go on sombodys thread and say shit that you shouldnt put on My thread....*Cough* Tom...jesus....

And no this isnt a throw together piece of shit. They are soldered together...not glued....and the soldering joints are covered with a layer of electrical tape.

So to all you assholes who have nothing good to say, dont say it.

Thanks. 🙂

Instead of using electrical tape, go invest in some heat-shrink and make them look a little more professional. Just a suggestion.

FEZ · 11-30-2004, 07:04 PM

I already have. The first few which i distributed among my friends and a few teammates were Electrical-tape-ified. All of the other ones have been Heat Shrinked and look and work amazing.

wileyc143 · 11-30-2004, 07:30 PM

Quote:

Originally Posted by fez

I already have. The first few which i distributed among my friends and a few teammates were Electrical-tape-ified. All of the other ones have been Heat Shrinked and look and work amazing.

I'm just being the Devils Advocate man, remember I don't get to head down to addicts, or adrenaland to check out what people modding. So can you hook me up with a pic?